| M72 |
M-Module |
4 |
RS422 or TTL or 24 V |
44-pin HD-Sub |
Yes |
Windows, Linux, QNX, VxWorks, OS-9 |
4 independent cascadable 32-bit counters, Quadrature incremental encoder interface, Customized counter modes via FPGA |
The M72 M-Module™ is a timer, counter and comparator with four 32-bit counter units. The four counters work independently in several modes, e.g. counting decoder signals or measuring frequencies. |
Carrier required |
Extended temperature -40° to +85°C, Conformal Coating |
| M54 |
M-Module |
1 |
RS422 or TTL, ±10 V, 1 relay output |
25-pin D-Sub |
Yes |
Windows, Linux, QNX, VxWorks, OS-9 |
LM628, additional binary I/O, Quadrature incremental encoder interface, PID values programmable |
The M54 is a motor controller that is suited for all types of motors that have a ±10V DC control input and that can provide a position feedback information using an incremental encoder (e.g. servo motors). |
Carrier required |
Conformal Coating |
| M50 |
M-Module |
1 |
Synchro / resolver |
25-pin D-Sub |
Yes |
Windows, Linux, QNX, VxWorks, OS-9 |
On-board reference frequency generation, On-board signal conditioning, Analog velocity output |
The M50 is a 1-channel, continuous-tracking synchro- or resolver-to-digital converter with a configurable |
Carrier required |
Extended temperature -40° to +85°C, Conformal Coating |
| M47 |
M-Module |
4 |
RS422A |
25-pin D-Sub |
Yes |
Windows, Linux, QNX, VxWorks, OS-9 |
Serial Synchronous Interface, Absolute value data input, Automatic communication |
The M47 is a Serial Synchronous Interface M-Module™ for connection of up to four sensors to optically isolated SSI outputs. Serial synchronous interfaces are commonly used for many kinds of sensors such as rotary encoders. |
Carrier required |
Extended temperature -40° to +85°C, Conformal Coating |
| TPMC117 |
PMC |
6 |
TTL/RS422, 24 V |
68-pin SCSI-II |
Yes |
Windows, Integrity, VxWorks, LynxOS, LiNUX, QNX 6 |
Multiple channel read, 16 bit down-counter with preload |
The TPMC117 is a standard single-width 32 bit PMC module and offers six independent channels. Each of these channels can operate as a standard SSI interface controller, in a SSI ‘Listen only’ Mode, as an incremental encoder or general purpose counter. |
Carrier required |
Extended temperature -40° to +85°C |
| TPMC118 |
PMC |
6 |
TTL / RS422, 24 V, +/-10V |
68-pin SCSI-II |
Yes |
Windows, Integrity, VxWorks, LynxOS, LiNUX, QNX 6 |
6 channel motion controller with 32 bit up/down counter with preload and output register, On board DC/DC converter to supply isolated part of encoder interface |
TPMC118 is designed for motion control applications offering six independent channels. Each channel consists of an TTL / RS422 compatible encoder interface, one digital 24V input and one +/-10V analog output. |
Carrier required |
- |
| TPMC150 |
PMC |
1 ÷ 4 |
Synchro / resolver |
68-pin SCSI-II |
Yes |
Windows, Integrity, VxWorks, LynxOS, LiNUX, QNX 6 |
32 bit up/down encoder counter with preload and output register per channel, 1x digital 24V input per channel |
The TPMC150 provide one up to four channel of a Tracking Synchro/Resolver-To-Digital Converter (RDC) with a converter accuracy of 2 arcmin + 1LSB. |
Carrier required |
Extended temperature -40° to +85°C |
| TPMC317 |
PMC |
6 |
TTL/RS422, 24 V |
P14 |
Yes |
Windows, Integrity, VxWorks, LynxOS, LiNUX, QNX 6 |
Multiple channel read, 16 bit down-counter with preload |
The TPMC317 is a conduction cooled PMC module and offers six independent channels. Each of these channels can operate as a standard SSI interface controller, as an incremental encoder or general purpose counter. |
Carrier required |
Extended temperature -40° to +85°C, Conduction cooled |
Prodotti 
